Chapter 5 115
Installing Application Software
Installing Application Software
the license file on the USB memory device at the root level. Follow the
instructions that come with your software installation kit.
Installing a license key can also be done manually using the license
management application in the instrument. It is found through the
instrument front panel keys at
System, Licensing. . . , or internally at
C:\Programming Files\Agilent\Licensing.
NOTE You can also use these procedures to reinstall a license key that has
been accidentally deleted, or lost due to a memory failure.
Missing and Old Measurement Application Software
All the software applications were loaded at the time of original
instrument manufacture. It is a good idea to regularly update your
software with the latest available version. This assures that you get
any improvements and expanded functionality that is available.
Because the software was loaded at the initial purchase, there may be
additional measurement applications that are now available. If the
application you are interested in licensing is not available, you will
need to do a software update. (Press
System, Show, System.)
Check the Agilent internet website for the latest software versions
available for downloading:
http://www.agilent.com/find/mxa_software
http://www.agilent.com/find/exa_software
You must load the updated software package into the analyzer from a
USB drive, or directly from the internet. An automatic loading program
is included with the files.
To Previous Page
Loading...
Need help?
General
