10 Chapter 1
Introduction to Programming X-Series Applications
Using Embedded Help for Programming
Using Embedded Help for Programming
The embedded Help system in your analyzer contains context-sensitive reference
information for each Measurement Application installed. While using the instrument, just
push the green Help key to see the Help topic for the active function or key.
Using the Help System on Your PC
The Compiled Help Metafile (CHM) is also provided on the Documentation CD ROM for
access locally on your PC for reference. In Microsoft Windows, use Windows Explorer to
navigate to the <mode_name>.chm file on the CD ROM, and double-click the file to launch
Help.
Help System Features Especially Useful for Programmers
Help System Contents Pane
The following programming-specific features described below are shown in the Help
system Contents Pane (see Figure 1-1 on page 10) and explained below:
• “Help Topics” on page 11
• “List of Commands” on page 12
• A Section called “Remote Only Commands” may be shown.
Figure 1-1 Example Help System “Contents” Pane
To Next Page
Loading...
Need help?
General
