Capacitance
1 Set the rotary switch to .
2 Connect the red and black test leads to
input terminals (red) and COM
(black) respectively.
3 Connect the red test lead to the positive
terminal of the capacitor, and the black test
lead to the negative terminal.
4 Read the display.
Temperature
1 Set the rotary switch to . Press
to select temperature
measurement.
2 Connect the red and black test leads to
input terminals (red) and COM
(black) respectively.
3 Plug the thermocouple adapter (with the
thermocouple probe connected to it) into
input terminals (red) and COM (black).
4 Touch the measurement surface with the
thermocouple probe.
5 Read the display.
To Next Page
Loading...
