(2)Activate the network RTK
Mobile base station version is not equipped with network RTK account;If you need to use the
network RTK function, you can turn on the "Ntrip mode" switch in the RTK setting interface and
return to the main interface to configure account information.
The RTK setting
click ，Click on top right corner“...”(More Settings button),Enter the aircraft
setting, slide down the aircraft setting bar, find and click "RTK" to enter the RTK setting
interface.
Activate the network RTK
Please ensure that the remote control network is unblocked, and clicks the Ntrip RTK
,then configure the account in Ntrip RTK
To Next Page
Loading...
