In the following cases, it is necessary to perform magnetic compass calibration to
ensure that the flight direction is correct, otherwise flight safety accidents may occur:
After assembling the aircraft, make sure to perform a magnetic compass calibration.
When replacing the GPS module and moving more than 100 kilometers from the previous
take-off point, make sure to calibrate the magnetic compass.
Step 7: Tare free
Click on the weighing icon to enter the weighing system and enter the taring.
After placing the aircraft level and confirming that there is no material in the tank, a
calibration with taring can reset the current weighing value to 0.
Step 8: Weighing Calibration
Add the pesticide to be sprayed or the material to be spread, the weighing calibration interface
will display the weight of the current tank in real time, if the displayed weight is inaccurate, the
weighing calibration can be performed.
To Next Page
