Install the spreading system on the unmanned drone according to the direction in the figure,
and then connect the power cord of the spreader to the over-current protection module,
and the threaded plug must be tightened, otherwise it will lead to poor contact of the plug or
short circuit due to insufficient sealing into the water
Step 4: Install the transparent bezel.
Installing transparent baffles can prevent the drone from being soiled by the dust of
the fertilizer to a certain extent, and protect the propellers from being hit by the
flying fertilizer.
First, align the hole of a transparent baffle with the hole of the spreader shell (marked by
the dotted line in the figure), and fix it with the attached screw.
Insert another baffle into the gap between the two connecting plates (the dotted coil out
position in the figure), align and install the plastic willow nails and screws in turn.
ⅢCleaning,Maintenance,and Care After
Operations
After each day's operation, clean the entire aircraft and remote control.
(1) Add water or soapy water to the pesticide tank and spray it completely to avoid pesticide residues,
To Next Page
Loading...
