Ahlborn ALMEMO 710 - Default Chapter; Operating Controls

1. Operating controls
1. OPERATING CONTROLS
(1) Measuring sockets M0 to M9
M0 ... M9 for all ALMEMO sensors
M0.0...M9.9 for up to 100 meas. chan-
nels
(2) Output sockets A1, A2, A3
A1 USB Interface (ZA1919-DKU)
RS 232/LWL (ZA1909-DK5/DKL)
RS 422 (ZA 5099-NVL/NVB)
Ethernet (ZA 1945-DK)
Analog output 2 (ZA 1601-RK)
A2 Network cable (ZA1999-NK5/NKL)
Trigger input (ZA 1000-ET/EK)
Relay outputs (ZA 1006-EGK)
Relay trigger adapter (ZA 8006-RTA)
Analog output 1 (ZA 1601-RK)
A3 SD card connector (ZA1904-SD)
(3) Socket, DC 12V
DC Mains adapter (ZA1312NA9, 12V, 2.5A)
Cable, el. isol. (ZA 2690-UK2, 10-30V)
(4) Ax Emergency switch, hidden
2 ALMEMO
®
710
(5) Status LEDs
START Meas. operation is running.
REC Data is being saved.
COM Data is being output.
ALARM Limit value infringement.
LOCKED Block function is active.
CHARGE Battery is being charged.
SLEEP Sleep mode
ON Device is switched ON.
(6) Touchtasten
ON-OFF To switch ON / OFF.
HOTKEY To call up a desired menu.
HOME Start screen
(7) Touchscreen
return to the last meas. menu
return to the last meas. menu
return to the last meas. menu
Sensor menu
Measured value display
Data logger
Settings
Date, time-of-day
Battery charge status, Memory