Ahlborn ALMEMO 710 - 9.6 List of parameters; 9.7 Entering data

9. Display and keypad
9.6 List of parameters
All measured values and parameters are shown in fields in various ways to-
gether with additional symbols.
Measured value
Limit value overshoot in red
Limit value undershoot in blue
Measuring range overshot OVERRANGE flashes
Measuring range undershot UNDERRANGE flashes
Sensor breakage BREAK flashes
Sensor voltage too low U-LOW flashes
A red triangle in the top right corner indicates that by
touching on it a further menu can be called up.
The parameters in this menu are not yet programmed but
they can be programmed.
Parameters are programmed.
A blue triangle in the top right corner indicates that by
touching on it a help text can be called up.
9.7 Entering data
First touch on the parameter in question and then use the
numerical keypad to enter data.
To delete a parameter Clr
To delete a character to the left 
To change the arithmetic sign ±
To abort without saving
To save and quit OK
24 ALMEMO
®
710