User menus
Once all functions have been entered, the menu can be saved under the cho-
sen name by pressing the ´ Settings ´ key and the cells are populated with he
current values. The functions can be programmed by touching on them in the
usual way. Measured value scanning is controlled by means of keys ´ Start
and Manual .
The menu can be modified at any time via option ´Edit user menu´. The con-
tent of a populated cell can be deleted by touching on the waste bin; a new
function can then be assigned to it.
Backup and recovery
In the ALMEMO
®
-Control software the user menus can be saved and if neces-
sary restored - via ´Device list´ and the ´File´ menu.
ALMEMO
®
710 39
To Next Page
Loading...
