Note Before AssemblyIcons and Stickers Guide
08 09
Your bicycle comes fully assembled. These instructions are intended to assist you in setting up
and getting familiar with your new bicycle.
Serial number is located on the head tube of the bicycle as shown below. Please write it down
inside the front cover of this manual.You may be asked for your bicycle's serial number as part of
a warranty request, You may also be asked to provide this number to law enforcement if your
bicycle is stolen.
Before removing the packaging material from your bicycle, remove all items from the box and
make sure you have the following:
If anything is missing or is damaged, contact Aipas eBikes immediately for assistance.
For a video about visit our YouTube page: Aipas eBikes
After you make your first adjustments and inspect your bicycle,
we recommend seeking professional help from a reputable and
certified bicycle mechanic to check your bicycle before your first
ride.
STARTING
Serial Number
What's in the box:
Aipas eBike Aipas eBike Charger Manufacturer Manuals Battery Keys
There are warning labels on your Aipas eBike for your protection. If a label is missing or is not
legible, contact Aipas eBikes for a replacement.
States that recognize three classes of eBikes require a label to be placed on the bicycle denoting
the class of your Aipas eBike, the motor’s wattage rating, and the top speed of your Aipas eBike.
Your bicycle comes as a Class 2 bicycle by default and has a label with this information posted
under the carry-handle, near the seat post on the bicycle.
If you change your bicycle’s top speed, you must remove this label from the bicycle and replace
it with a Class 3 label, detailing your Aipas eBike’s class, top pedal-assisted speed,and motor
wattage. The Class 3 label is put in the small box.
Stem label Class 2 label Class 3 label
On-Product Waming Labels
WARNING
To Next Page