Product Overview Setting Up Your Aipas eBike
10 11
NOTE: This manual is not intended to be an extensive reference book about service, mainte-
nance, and/or repairs.You can find more information on our website: Aipasbike.com
Hub Motor
Fender stay
Front Hub Disc Rotor
Rear Freewheel
Fender
3"Tire
Headlight Mount
Head Set
Quick Plugs
Stem Clamp
Folding Stem Latch
Head Tube
Front Mounting Point
Suspension Fork
Tail light
Integrated Rear Rack
Seat Post Collar & clamp
Seat Post
Saddle
Display
Telescoping Stem
Rear Derailleur
Crank Bolt
Pedal
Driveside
Crank
Frame Fold Latch
Top Tube
Seat
Tube
Chainring
Chain
Kick Stand
1
Begin with the handlebar in the folded
position, then pull the handlebar stem to
its upright position.
2
Push the latch firmly until it locks in
position, then pull on it to confirm it is
secure and the handlebars cannot fold.
Folding and Unfolding the Stem:
2
Pull the latch away from
the stem while still holding
the “open” button.
1
Pull up on the silver button
labeled “open” to unlock
the latch.
3
Fold the stem by lowering
it to the side.
DISPLAY CONTROL PAD
LCD DISPLAY
HALF-TWIST THROTTLE
GEAR SHIFTER
To Next Page