Setting Up Your Aipas eBike Setting Up Your Aipas eBike
12 13
1
Unfold the bike frame, and stand near
the frame where the battery is exposed.
Grab the stem and rear end of the bike.
Lift the bike slightly off the ground and
swing to the closed position.
2
Push down the latch firmly until it locks
into position. Pull on the latch to confirm
that the latch has locked and that the
frame cannot fold.
Unfolding and Folding the Frame
1
Rotate each pedal until you hear a click
indicating it is locked in place, signifying
that the pedal is fully unfolded.
2
Hold the pedal and gently push it towards
the bike frame.
3
Turn the pedal to snap it into place
(perpendicular to the original pedal
position), completing the folding process.
Unfolding and Folding the Pedal
2
Pull the latch while still
holding the switch to the
“open” position.
1
Unlock the bike frame and
fold it by sliding the "open"
switch to the right.
3
Grab the frame near the
battery and fold the bike
To Next Page