AIPAS AIPAS-A2 - Charge the Battery; Specifications

ITEM
Model
Product Dimensions
Package Dimensions
Max Load
Package Weight
E-Bike Weight
Max Speed
Range
Charging Time
Charger
Battery
Tire Pressure
Bell/Horn
Frame Material
IP Level
Motor
SPECIFICATIONS
Setting Up Your Aipas eBike Specifications
16 17
Fire and explosion hazards. Never leave your battery battery unattended while
charging to prevent serious injury or death.
The battery can be charged either by removing it from the bike or while it is installed on the
bike.
1.
When charging the battery without removing it, first remove the dust plug located on the
frame, then insert the charging connector into the charging port.
2.
When charging the battery after removing it, directly insert the charging connector into the
battery's charging port.
3.
Typically, the charger’s indicator light shows red while charging, green when fully charged,
and also red when not charging.
4.
You should fully charge the battery before your first ride.
Charge The Battery
WARNING!
AIPAS-A2
67*27*44(Inch)
38*16*29(Inch)
350 Lbs
78 Lbs
65 Lbs
28 mph
62 Miles
48V 11Ah
48V
4-5 Hours
23-25 PSI
Electric Horn Installed
750W
6061 Aluminum frame
IPX 6