- 13 -
PREPARATION
2 Setting IP address
1 From the MANUAL SETUP screen,
tap
IP Address
.
The setting items will be shown.
2 Con¿ gure the settings for each item
.
* Tap
>
or
<
to change the page of the item list.
Item Description
IP Select the IP version (v4 or v6) and
the setting method (Auto or
Manual).
IP Address/
Subnet Mask (v4 only)/
Prefix (v6 only)/
Default Gateway/
DNS Server
It can be configured only when IP is
set to "Manual".
* When "Auto" is selected, the
settings are automatically
con¿ gured and grayed out.
Tapping the entry field displays the
keyboard. (ĺ P. 16)
Tap
9
after ¿ lling out the entry
¿ eld to determine the values.
3 When the IP settings have been completed,
tap
9
.
Tap to return to the MANUAL SETUP screen.
NOTE:
• The station will restart when changing IP version (IPv4/IPv6) or
confi guring IPv6.
• If you connect the station to the Wi-Fi router by using the "Auto
Connect (WPS)" method after the IP address was set by using
"Manual Setup" method, initialization of the user setting is
necessary. (
ĺ P. 42)
Number of registerd Apps con¿ rmation
message
When connecting to the network for the ¿ rst time, delete
registered apps
(ĺ P. 20) before making setting changes.
To Next Page
Loading...
