- 25 -
USING THIS STATION
Communication using touch-to-talk
Touch-to-talk is a method of communication in which manual
control of incoming and outgoing audio is used. Touch-to-talk
is recommended in loud or noisy environments.
While in communication, tap .
The touch-to-talk method will be enabled.
To speak, tap .
The will change to .
* Entrance station or guard station audio is muted.
To listen, tap
.
* The will change to .
* Residential/tenant station audio is muted.
Adjusting the screen brightness
1 Tap .
The brightness adjusting bar will be shown.
2 Tap
+
to adjust the screen brighter, and
to adjust the screen darker.
The default value is 3, with a minimum of 1 and a
maximum of 5.
Adjusting the receiving volume
The receiving volume can only be adjusted while in
communication.
1 Tap .
The volume adjusting bar will be shown.
2 Tap
+
to adjust the volume higher, and to
adjust the volume lower.
The default value is 2, with a minimum of 1 and a
maximum of 3.
To Next Page
Loading...
