Why AIRLESSCO 450 Paint Sprayer leaves craters or bubbles on work?
If you're seeing craters, pock marks, or bubbles on your work with the AIRLESSCO Paint Sprayer, it could be a solvent balance issue. Use 1 to 3% “short solvents remainder “long” solvents. This is most likely to happen with material of low viscosity, lacquers, etc.
What to do if AIRLESSCO Paint Sprayer screens are clogged?
If the screens of your AIRLESSCO Paint Sprayer are clogged, it's likely due to extraneous material in the paint, coarse pigments, or poorly milled pigments. Clean the screen. Use a coarse screen if the orifice size allows. Use a coarser screen with larger orifice tips. Obtain ball milled paint. If thinner has been added, test to see if a cover screen. Incompatible drop placed on top of paint mixes or flattens out on the paint mixture & thinners on the surface. If not, try a different thinner in a fresh batch of paint.
Covers injection hazards, medical alerts, and immediate treatment procedures for serious injuries.
Guidelines for safe operation, including area inspection, gun safety, tip guard, and tip safety.
General safety rules covering modifications, smoking, children, and personal protective equipment.
Proper handling and grounding of hoses to prevent hazards and ensure system integrity.
Warnings about component rupture and preventing static-sparked fires/explosions.
Risks associated with toxic fluids and warnings to keep clear of moving machinery parts.
Procedures for safe flushing, including pressure relief and solvent selection.
Guidance on electrical safety, grounding, and selecting appropriate extension cords.
Specific safety measures when spraying or cleaning with flammable paints or thinners.
Table detailing common spray gun defects, their causes, and corrective actions.
Troubleshooting steps for priming failures and low/no pressure problems.
Solutions for maintaining pressure and problems related to the unit not running.
Step-by-step guide for performing the initial zero calibration of the pressure control assembly.
Procedures for calibrating the pressure settings and phase limit of the control assembly.
Troubleshooting steps for initial checks including control settings, fuse, and power source.
Steps to diagnose issues related to thermal overload, motor brushes, and sensor.
Troubleshooting the potentiometer and pressure control assembly for startup failures.
General| Brand | AIRLESSCO |
|---|---|
| Model | 450 |
| Category | Paint Sprayer |
| Language | English |
To Next Page