AIRLESSCO SP200 - User Manual

Operation
SP200, SP300, AllPro Mustang 2400,
Mustang 3100
3A0994E
EN
For portable spray application of architectural paints and coatings. For professional use
only.
See page 2 for model information, including maximum working pressure and approvals.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
SP200/Mustang 2400 Model: Use water based or
mineral-spirit type material only. Do not use materials
having flash points lower than 70°F (21°C). This
includes, but is not limited to, acetone, xylene,
toluene, or naptha. For more information about your
material request MSDS from distributor or retailer.
SP200 Model 24F557
Mustang 2400 Model 24F559
SP300 Model 24F558
Mustang 3100 Model 24F560
ti111304a
ti11305a

Summary

Important Safety Instructions

Warnings

Grounding and Electrical Safety

Details grounding requirements and electric shock hazards.

Fire and Explosion Hazards

Covers fire, explosion, and toxic material risks.

Personal Injury and Chemical Hazards

Addresses skin injection, equipment misuse, and material compatibility dangers.

Toxic Exposure and Protective Equipment

Specifies PPE and handling of toxic fumes and moving parts.

Installation

Grounding and Electric Requirements

Details electrical grounding and connection requirements for the sprayer.

Operation

Pressure Relief Procedure

Setup

Initial Setup Procedures

Priming, flushing, and installing components before first use.

Spraying Adjustments and Techniques

Getting Started With Basic Techniques

Shutdown and Cleaning

Pail Flushing

Step-by-step guide for flushing the sprayer using a pail.

Power Flush

Maintenance and Service

Troubleshooting

Motor and Power Issues

Priming and Pressure Problems

Spray Pattern and Flow Issues

Gun and Component Failures

Overheating and Voltage Issues

AIRLESSCO SP200 Specifications