14
Information. This parameter provides information on:
• Zone: rmware, zone, association, actuator or status of the
communications.
• System: rmware, settings and information about the system
controllers.
• Devices: It displays the elements connected to the system.
• Warnings and errors on system.
Clean screen: Select this option if you want to clean the screen. The touch
screen will lock for a few seconds.
Press on the icons to access the parameters.
Timer. It is an auto power-o timer of the zone. You can select:
Lite settings*. This parameter denes the base set-point temperature for
zones with Wireless Lite Thermostat.
ZONE SETTINGS
O. Timer is not activated.
30. Thirty minutes after its activation, the zone will turn o.
60. Sixty minutes after its activation, the zone will turn o.
90. Ninety minutes after its activation, the zone will turn o.
*Note:
This parameter is available
when navigating to a
Wireless Lite Thermostat
from a Wired Thermostat.
To Next Page
Loading...
