holes, cracks or other signs of possible internal damage, and check the type of energy storage. If there is any abnormality on
the package or model of the energy storage is inconsistent, do not open it and contact us as soon as possible.
Inspection of deliverable
After opening outer package of the energy storage, check if the deliverable is complete and whether there is any visible
external damage. If any items are missing or damaged, please contact us.
5.2
Preparation of Tools and Meters
Personal protective
equipment
5.3
Selection of Installation Location
5.3.1 Basic Requirements
●
When the energy storage is running, the temperature of the case and the radiator will be high. Therefore, do not
install them in a place that is easy to touch.
●
Do not install in areas where flammable and explosive materials are stored.
●
If the energy storage is installed in areas with salt damage, it will be corroded and may cause fire. Therefore, do not
install it outdoors in areas with salt damage. The areas with salt damage are defined as the areas which are not 500m
away from shore or will be affected by sea breezes. The areas affected by the sea breezes vary depending on
meteorological conditions (e.g. typhoons, monsoons) or topographical conditions (dams, hills).
●
Do not install in the place where children can touch.
To Next Page
Loading...