EasyManua.ls Logo

AJ PowerCube P5A - Device Installation

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
File version: V1.0
Page 23 of 33
The energy storage cannot be installed forwardly, horizontally, inversely, backwardly or sideways.
When drilling holes on walls or ground, the goggles and protective gloves shall be worn.
During drilling, the device should be shielded to prevent debris from falling into the device. After drilling, the debris
shall be cleaned up in time.
When handling any heavy objects, you should be prepared to bear loads to avoid being crushed or sprained.
When handling the device by hand, wear protective gloves to avoid injury.
or
<18kg 18kg~32kg 32kg~55kg >55kg
5.3.2 Installation Space Requirements
When installing the energy storage, certain space shall be left around it to ensure sufficient space for installation and heat
dissipation.
5.4
Device Installation
The battery should be placed in the right position first, and the installation site should be smooth and the floor should
be solid, and the device is 20-50cm away from the wall.
200mm
200mm
200-500mm
200mm