Akai A60020

7
9. Place the stylus vertically over the rst
track of the record and the turntable
will start turning automatically.
10. Put down the stylus slowly on the
record to play.
11. Once the tone arm reaches the end
of the record at the centre of the
turntable, playback will stop. Lift up the
tone arm and put it on the rest when
nished.
Note: The record should automatically stop
when it comes to an end. If the turntable
does not shut o, turn o the power with
the On/O Volume Dial.
Note: If your record stops before the last
track nishes, you will have to manually re-
start playback.
12. Replace the protective cap on the stylus
and close the tone arm lock.
13. Turn o the power with the On/O
Volume Dial (anti-clockwise), and
unplug the device at the Mains.
Note: Always ensure that the tone arm is
secured before transporting.
ENCODE MUSIC VIA USB
1. Make sure the turntable is on.
2. Place a record on the turntable.
3. Insert the USB into the USB port of the
turntable.
4. Long press the Mode button to select
USB to begin encoding your music.
5. Begin record playback.
6. When nished, long press the Mode
button.
Note: Encoding can only be done via USB.
This feature does not work in Bluetooth
mode.
PLAYING MUSIC VIA USB
1. Make sure the turntable is on.
2. Insert the USB (with your encoded
music) into the turntable’s USB port.
3. Control playback via the turntable’s
controls.
PLAYING MUSIC VIA BLUETOOTH
1. Turn on the turntable by rotating the
On/O Volume dial in a clockwise
direction.
2. Press the Mode button to select BT or
Bluetooth mode.
3. The Bluetooth indicator light will ash
when the turntable is ready to pair with
your device.
4. Turn Bluetooth on in your mobile device
and search for the turntable. Select
“A60020” and pair it with your device.
Note: If a password is required, press
“0000” and pair with the device.
5. The Bluetooth indicator light will
stop ashing once your device is
successfully paired.
6. Music playback and sound can now
be controlled on the turntable or your
mobile device.