AKCP SP+ Series Introduction Manual

SPX+ Introduction Manual - updated until firmware 4997
- 43 -
Date/Time
The system date and time with time zone is user configurable, with NTP server synchronization. If the
unit is connected to APS (AKCPro Server), then it will sync with the APS NTP service. Also displayed
is the status of the RTC battery (good/bad).
F7 units will also let you specify secondary NTP, and secured NTP servers.
You can also select the frequency of NTP synchronization with the drop-down menu.

AKCP SP+ Series Specifications

General

Brand	AKCP
Model	SP+ Series
Category	Measuring Instruments
Language	English