AKCP SP+ Series Introduction Manual

SPX+ Introduction Manual - updated until firmware 4997
- 54 -
SNMP
The SNMP service configuration options are shown here, it is required for SNMP operations.
SNMPv1 is enabled by default, with community password “public”.
This is provided for the easiest integration with third party SNMP tools.
For enhanced security, it is recommended that you change the default SNMP password.
Scroll down for SNMPv3 options.

AKCP SP+ Series Specifications

General

Brand	AKCP
Model	SP+ Series
Category	Measuring Instruments
Language	English