What to do if my AL-KO Robolinho 4000 displays 'CN119: R-Bumper deflected CN120: L-Bumper deflected'?
If your AL-KO Lawn Mower displays 'CN119: R-Bumper deflected CN120: L-Bumper deflected', it indicates that the automatic lawnmower has encountered an obstacle and cannot move clear for safety reasons, for example, collisions close to the base station. Remove the obstacle and acknowledge the fault message.
What to do if my AL-KO Robolinho 4000 Lawn Mower shows 'CN001: Tilt sensor'?
If your AL-KO Lawn Mower shows the error 'CN001: Tilt sensor', it means the maximum tilt has been exceeded. This can happen if the automatic lawnmower has been carried or is on a slope that is too steep. Place the automatic lawnmower on a flat surface and acknowledge the fault.
What does it mean if my AL-KO Robolinho 4000 Lawn Mower shows 'CN010: Bad position'?
If your AL-KO Lawn Mower displays 'CN010: Bad position', it means the automatic lawnmower is outside the loop. Place the automatic lawnmower back in the mowing area.
What does it mean if my AL-KO Robolinho 4000 displays 'CN012: Cal: no loop CN015: Cal: outside'?
If your AL-KO Lawn Mower shows 'CN012: Cal: no loop CN015: Cal: outside', it indicates a fault during calibration because the automatic lawnmower couldn't find the loop. To resolve this: * Place the automatic lawnmower at right angles to the loop, ensuring it can drive over the loop. * Check the base station power supply. * Inspect the loop. * Disconnect and reconnect the transformer. * Check for any crossed-over loop cables.
General| Brand | AL-KO |
|---|---|
| Model | Robolinho 4000 |
| Category | Lawn Mower |
| Language | English |
Crucial guidelines to prevent accidents and ensure safe operation.
Visual and descriptive guide to the machine's main components.
Explains built-in safety features and their importance.
Explains how the Robolinho operates and its core functionalities.
Details the various sensors and their roles in operation and safety.
Guidance on laying and securing the boundary wire.
Description of the buttons and display on the machine's control panel.
Instructions for managing security codes for the Robolinho.
Procedure for entering the factory-set or new PIN code.
Steps to calibrate the machine for optimal mowing path.
How to configure mowing schedules for different days of the week.
Common issues, their causes, and solutions for the Robolinho.
Detailed list of error codes and troubleshooting steps.
Further troubleshooting for less common error codes and issues.
To Next Page