To Next Page
C
Christine StevensAug 25, 2025
Why is my AL-KO Lawn Mower showing 'No loop signal'?
- JJoseph HamptonAug 26, 2025
The 'No loop signal' error on your AL-KO Lawn Mower indicates a problem with the boundary cable. This could be due to: a faulty boundary cable, a missing loop signal, or a loop signal that is too weak. To resolve this, check the LEDs on the base station, verify the power source of the base station by disconnecting and reconnecting the power supply, and inspect the boundary cable for any damage, repairing it as necessary.
General
Weight and Dimensions
