What does 'CN130: Blocked WR' mean on my AL-KO Robolinho 500 Lawn Mower and how to fix it?
The error 'Blocked WR' on your AL-KO Lawn Mower indicates that the right wheel motor is blocked. To resolve this, remove the blockage.
Why does my AL-KO Robolinho 500 Lawn Mower show 'CN110: Blade motor over heating'?
If your AL-KO Lawn Mower displays 'Blade motor over heating', it means the mowing motor has overheated (more than 80 °C). To fix this, switch off the appliance and let it cool down.
What does AL-KO Lawn Mower error 'CN128: Recov Impos- sible' mean?
The error 'Recov Impossible' on your AL-KO Lawn Mower means that the appliance has moved onto an obstacle and cannot free itself, is outside the designated grass surface, or the left wheel motor is blocked. To fix this, remove the obstacle, place the appliance on the free, designated grass surface, correct the location of the boundary cable, or remove the blockage from the left wheel motor.
What does 'CN119: R-Bumper de- flected CN120: L-Bumper de- flected' mean on my AL-KO Lawn Mower?
The error message 'R-Bumper deflected' or 'L-Bumper deflected' on your AL-KO Lawn Mower indicates that the appliance has moved onto an obstacle and cannot free itself. To solve this, simply remove the obstacle.
What to do if my AL-KO Lawn Mower displays 'Cal: no loop CN015: Cal: outside'?
If your AL-KO Lawn Mower shows 'Cal: no loop' or 'Cal: outside' during calibration, it means the appliance cannot find the boundary cable. To resolve this, check the LEDs on the base station, check the power source of the base station by disconnecting and reconnecting the power supply, and place the appliance at the prescribed calibrating position, aligned precisely at right angles, ensuring it can drive over the boundary cable.
Why does my AL-KO Robolinho 500 Lawn Mower display 'CN005: Bumper de- flected'?
The 'Bumper deflected' error on your AL-KO Lawn Mower means that the appliance has driven into an obstacle and cannot free itself, possibly due to a collision close to the base station. To fix this, place the appliance on the free, designated grass surface and correct the location of the boundary cable.
What to do if my AL-KO Lawn Mower shows 'Escaped robot'?
If your AL-KO Lawn Mower displays 'Escaped robot', it means the appliance is outside the designated grass surface. To solve this, correct the location of the boundary cable around curves and obstacles.
What to do if my AL-KO Lawn Mower shows 'Bad position'?
If your AL-KO Lawn Mower is showing a 'Bad position' error, it indicates that the appliance is either outside the designated grass surface or the boundary cable has been routed in a criss-cross pattern. To resolve this, place the appliance on the free, designated grass surface and correct the location of the boundary cable around curves and obstacles, making sure to eliminate any criss-crossing of the cable.
What to do if AL-KO Robolinho 500 shows 'Loop signal weak'?
If your AL-KO Lawn Mower displays a 'Loop signal weak' message, it means that the loop signal is too weak or the boundary cable is buried too deep. To fix this, check the LEDs on the base station, check the power source of the base station by disconnecting and reconnecting the power supply. Also, raise the boundary cable to the prescribed height, attaching it directly on the grass if necessary.
What to do if my AL-KO Robolinho 500 Lawn Mower displays 'Battery' error?
If your AL-KO Lawn Mower shows a 'Battery' error, several issues could be the cause. Here's what you can check: 1. If the rechargeable battery is flat, make sure the boundary cable location is correct. 2. If the loop of the boundary cable is too long or has too many islands, correct its location. 3. If there's no contact to the charging contacts, clean the charging contacts, ensure the appliance is properly placed in the base station, and that the charging contacts are making contact. 4. Remove any obstacles close to the base station. 5. If the appliance has gotten stuck, place it on the free, designated grass surface. 6. If the appliance does not find the base station, check the boundary cable for damage.
General| Type | Robotic lawn mower |
|---|---|
| Cutting width | 200 mm |
| Product color | Gray |
| Number of blades | 4 |
| Rotational speed | 3400 RPM |
| Maximum lawn area | 500 m² |
| Mulching function | - |
| Sound power level | 58 dB |
| Sound pressure level | 60 dB |
| Maximum cutting height | 55 mm |
| Minimum cutting height | 25 mm |
| Cutting clearance adjustment | Yes |
| International Protection (IP) code | IPX1 |
| Power source | Battery |
| Battery voltage | 20 V |
| Battery capacity | 2.5 Ah |
| Battery life (min) | 55 min |
Weight and Dimensions| Weight | 7600 g |
|---|
Explains how the automatic lawn mower operates, including mowing and charging.
Controlling the mower via WiFi, the inTOUCH app, and smartphone integration.
Specifies the intended non-commercial applications for the appliance.
Information on safety features and protective measures to prevent injury.
General safety guidelines for operating the appliance safely.
Details the required protective clothing and equipment for safe operation.
Ensuring the appliance is in good condition and safe to use, including checks before operation.
Details inappropriate uses of the machine, such as in public gardens or sports stadiums.
Instructions for setting and using the Personal Identification Number for appliance security.
Rules for the person operating the appliance, including age and capability requirements.
Guidelines to ensure the safety of people and animals around the operating mower.
Safety precautions related to the electrical components and power supply of the appliance.
Explanation of the safety sensors and their role in operation and error detection.
Instructions on preparing the lawn for mowing, including grass height and obstacle removal.
Guide on how to install the boundary cable, including connection and routing.
Guidance on planning the mowing areas, including base station location and boundary cable routing.
Detailed steps for correctly installing and positioning the base station.
Step-by-step guide for safely replacing worn or damaged cutting blades.
Guidance on troubleshooting common malfunctions and handling errors.
To Next Page
