Alarm.Com ADC-T2000 - Installing Batteries

Turn the Power On
Restore power to all the heating and cooling systems. This can be done at the circuit breaker.
Connect the Thermostat to the System
1. Put the thermostat in OFF mode (No mode icons are lit).
https://answers.alarm.com/Installation_and_Troubleshooting/Thermostats/Z-Wave_Thermostats/Alarm.com_Smart_Thermostat_(ADC-T2000)/Alarm.com_Smart_Thermostat_(ADC-T2000)_Installation_Guide
Updated: Sun, 15 Oct 2017 23:38:59 GMT
Powered by
10