1
Pre-installation checklist
• ADC-V724 camera (included)
• AC power adapter (included)
• Wi-Fi (2.4 or 5 GHz) connection to broadband Internet
(Cable, DSL, or Fiber Optic) Internet
• A computer, tablet, or smartphone with Wi-Fi is required if the
router does not have the Wi-Fi Protected Setup (WPS) feature.
There are two options for connecting the V724 to the Wi-Fi
network: Access Point (AP) mode or Wi-Fi Protected Setup
(WPS) mode. Use WPS mode if you have easy access to the
customer’s router and the router has the WPS feature enabled.
Note that some Internet Service Providers disable the
WPS feature on customer routers. AP mode is the most
reliable method for installing this device.
To Next Page
Loading...
Need help?
General
