8 89
In the event of a collision with an obstacle, the e-motion wheels promptly switch off cruise mode.
By briefly pressing (less than 1 second) the On/Off button [15], neither the control unit nor the two e-motion wheels are
switched off – as indicated by the illuminated LEDs. This means that the e-motion wheels are immediately set in motion
again as soon as the speed dial [16] is turned (even unintentionally). In this respect, you should completely switch off
the two e-motion wheels in the event of an emergency stop (see Chapter 9) until it is safe for you to continue.
7. Changing the assistance level
If the control unit is switched on and there is a Bluetooth connection to the two e-motion wheels, it is possible to toggle between assist-
ance level 1 and 2 for support for the manual, residual power-assisted travel mode. To do this, briefly press the On/Off button [15] twice
(double-click).
When it is switched on, the e-motion is always in the assistance level that was activated before it was last switched off.
Depending on which assistance level is activated and set, the maximum possible cruising speed may vary, for example, a max-
imum of 4 km/h in assistance level 1, standard travel profile.
To Next Page
Loading...
