14 815
13. Automatic shutdown
To save power, the e-motion wheels will shut down automatically when not in use for a set period of time. The factory setting for this
automatic shutdown time is 60 minutes. Your specialist dealer can adjust this for you.
The control unit is also deactivated at the time of the automatic shutdown. As of this moment, there is no longer an active Bluetooth con-
nection between the control unit and the e-motion wheels. These are then shifted to standby mode.
To put the system back into operation, the e-motion wheels can be switched on again via the control unit within 48 hours. If the wheels
have been in standby mode for more than 48 hours, they must be switched on directly using their On/Off button [2].
14. Pairing
14.1 General information
If you have purchased the e-motion together with the control unit, it is already set up for the two wheels and can be put into operation
immediately. f the control unit was replaced during a repair, it must be reprogrammed on the e-motion wheels.
For reasons of cybersecurity, i.e. to protect against possible hacker attacks, a smartphone with the e-motion Mobility app is required to
pair the control unit. This app can be downloaded free of charge from the Apple App Store or from Google Play Store using the search term
“e-motion M25”.
To Next Page
Loading...
