Albrecht AE355M - Searching Band Tips

English
62
If You Want to do
This -
Here’s How -
bank to scan
• Use the key to move through
frequencies and banks.
• Deactivate the bank(s) you do not want to
listen to, leaving only the desired band
active.
Searching Band Tips
If You Want to Do
This
Here’s How -
Begin searching
Press the
BAND/STEP
key. The screen
displays the last known searched band and
then begins searching for an active frequency
in that band.
Continue after the
AE355M has stopped
on an active
frequency
If the AE355M stops on an active frequency
that you do not want to monitor but you do not
want to lock out, press the
SEARCH
key or
the
UP/DOWN
keys.
Stop searching
Press
HOLD
.
The scanner stays on the
displayed frequency until searching is
resumed. Press
HOLD
again to resume
searching.
Select a different
band to search
Press the
BAND/STEP
key multiple times to
search through the available bands.