OPR-OUT
OPR-OUT (Outgoing Channel Optical Power Out of Range)
The OPR-OUT condition is raised on cards with a Wavelength Tracker detect point when
the power of the outgoing channel is outside of the provisioned power range. This alarm
may be caused by the introduction of more or less attenuation in the fiber, or by an
amplifier adjust that may have occurred elsewhere in the network, due to fiber repair
activity or network adjustments such as adding or deleting a node.
Severity Minor
Service affecting? No
Applicability A2325A, AHPHG, AHPLG, ALPHG, AM2017B, AM2125A,
AM2125B, AM2325B, CWR8
Corrective Action
Refer to “OPRTX (Channel Power Unstable)” (p. 2-239).
Trouble-clearing procedures OPR-OUT (Outgoing Channel Optical Power Out of Range)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-238
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
To Next Page
Loading...
