Field Replaceable Units
Page 134 7450 ESS-7
SHUTTING DOWN AND MODIFYING AN IOM CONFIGURATION
NOTE: IOMs and MDAs are hot swappable but you cannot replace an IOM without affecting the
MDA connectivity.
You can shut down ports, MDAs, and cards with the following commands in the
config context:
Command Example
Shut down ports:
Step 1 port port-id port 1/1/1
Step 2
shutdown shutdown
Step 3 port
port-id port 1/1/2
Step 4
shutdown shutdown
Step 5 port
port-id port 1/1/3 (etc.)
Step 6 shutdown shutdown
Shut down the card:
Step 7 card slot-number card 1
Step 8 shutdown shutdown
Shut down the MDA(s):
Step 9 mda slot-number mda 1
Step 10 shutdown shutdown
Step 11 mda slot-number mda 2
Step 12 shutdown shutdown
Remove the MDA(s) and card from the configuration:
Step 13 card# no mda slot-number no mda 1
Step 14 card# no mda slot-number no mda 2
Step 15 config# no card slot-number no card 1
To Next Page
Loading...
