Field Replaceable Units
7450 ESS-7 Page 135
Use the following command syntax to reconfigure the card, MDA, and port configurations:
Command Example
Configure slot and card type:
Step 1 card slot-number card 1
Step 2 card-type card-type card-type iom-20g
Step 3 no shutdown no shutdown
Configure MDA slot and type:
Step 4 mda slot-number mda 1
Step 5 mda mda-type mda-type m1-10gb
Step 6 no shutdown no shutdown
Step 7 mda slot-number mda 2
Step 8 mda mda-type mda-type m60-10/100eth-tx
Step 9 no shutdown no shutdown
Configure port:
Step 10 port port-id port 1/1/1
Step 11 no shutdown no shutdown
Continue port configurations as required.
To Next Page
Loading...
