Page 392 7450 ESS OS Basic System Configuration Guide
Profile may only be set to g.8265.1-2010 when the clock is Ordinary-Slave or Ordinary-Master.
Default ieee1588-2008
Parameters ieee1588-2008 — Conforms to the default BMCA of the 2008 version of the IEEE1588 standard.
g.8265.1-2010 — Conforms to the BMCA specified in the ITU-T G.8265.1 specification.
shutdown
Syntax [no] shutdown
Context configure>system>ptp>peer
This command disables or enables a specific PTP peer. Shutting down a peer sends cancel unicast
negotiation messages on any established unicast sessions. When shutdown, all received packets from the
peer are ignored.
If the clock-type is ordinary slave or boundary, and PTP is no shutdown, the last enabled peer cannot be
shutdown. This prevents the user from having PTP enabled without any peer configured & enabled
Default no shutdown
To Next Page
Loading...
