Alcatel-Lucent 7450 ESS-7 - Page 422

System Management
7450 ESS OS Basic System Configuration Guide Page 393
Redundancy Commands
redundancy
Syntax redundancy
Context admin
config
Description This command enters the context to allow the user to perform redundancy operations.
cert-sync
Syntax [no] cert-sync
Context admin>redundancy
Description This command automatically synchronizes the certificate/CRL/key automatically when importing or
generating (for the key); also, if there is new CF card inserted into slot3 into backup CPM, the system will
sync the whole system-pki directory from the active CPM.
Default none
rollback-sync
Syntax no rollback-sync
Context admin>redundancy
Description This command copies the entire set of rollback checkpoint files from the active CPM CF to the inactive
CPM CF.
Default None.
synchronize
Syntax synchronize {boot-env|config}
no synchronize
Context admin>redundancy
Description This command performs a synrchonization of the standby CPM’s images and/or configuration files to the
active CPM. Either the boot-env or config parameter must be specified.