Using your telephone
8AL90386ENABed01
If the telephone ringing is not in your pick-up group:
The system can be configured to prevent call pick-up on some telephones.
3.24 Hunting groups
Hunting group call
Some phone sets can be associated to form a group. You can contact any one of them by dialling the
group number.
Belonging to a group does not affect the management of direct calls. A specific telephone within a group
can always be called by using its own number.
Temporary exit from your hunting group
• Code of the 'Group exit' function (default code: 796).
• Enter your group number.
• Request accepted: Withdrw accepted.
• Code of the 'Return to group' function (default code: 797).
• Enter your group number.
• Request accepted: Cancel withdrw acc.
3.25 Diverting hunting group calls
You can divert your own group calls:
• Code of the 'Group call diversion' function (default code: 795).
• Number of diversion telephone.
• Diversion acknowledgement is displayed.
To cancel this function, refer to chapter: Cancelling all forwards.
To Next Page
Loading...
