Chassis and Power Supplies Mounting the Switch
OmniSwitch 6570M Hardware Users Guide December 2022 page 3-13
Rack Mounting Steps (Two Half-width Chassis - OS6570M-DUO-MNT Kit)
Two chassis can be assembled side-by-side for mounting into a standard 19-inch rack as show in the
figure below.
Fully Assembled Side-by-Side Chassis Assembly
1 Attach the slot-brackets and slide-brackets to the front and back of the chassis using the attachment
screws (M3 flat head) provided for each bracket.
Attach Slot/Slide-Brackets
Slot -bracket
Plate and Screws
Slide -bracket
Power Supply Tray Rear Bracket
(Not Used)
Front center mounting brackets.
Rear center brackets.
To Next Page
Loading...
