Standards Compliance Regulatory Compliance and Safety Information
page A-4 OmniSwitch 6570M Hardware Users Guide December 2022
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and
EMC standards.
Note. All hardware switching modules used in an OmniSwitch switch comply with Class A
standards. Modules with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
• US UL 60950-1
• IEC 60950-1 Health and Safety
• CAN/CSA-C22.2 No. 60950-1-03
• NOM-019 SCFI, Mexico
• AS/NZ TS-001 and 60950:2000, Australia
• UL-AR, Argentina
• UL-GS Mark, Germany
• CU, EAC, Russia
• EN 60825-1 Laser
• EN 60825-2 Laser
• CDRH Laser
• IEC 60950-1/EN 60950 with all country
• deviations
• IEC 60950-1:2005, Second Edition
• CCC, China
• ANATEL, Brazil (Contact for availability)
• BSMI, Taiwan (Contact for availability)
• KCC, Korea (Contact for availability)
To Next Page
Loading...
