Primary
Secondary
Secondary
Offline
Primary
Offline
Secondary
Primary
!
A stack of two OmniSwitch 6450 switches is 
operating normally. The stack consists of a pri-
mary module and a secondary module. (The 
software on both elements in the stack is syn-
chronized.)
The primary management module fails or is 
taken offline (e.g., powered off or rebooted by 
the user).
The switch operating as the secondary manage-
ment module immediately takes over the primary 
role. It is at this point essentially operating as a 
stand-alone switch.
If the switch that previously failed or was taken 
offline comes back online, it will assume the sec-
ondary role in the stack.
1
2
3
4