26 June 2012 12
Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
Factory Reset using Handset
It is possible to factory reset a VoWiFi Handset from its Admin menu.
1 To activate the Admin menu, select Menu > Settings and enter 40022.
2 Select “Factory Reset“.
3 A Reset portable? window appears, press “Yes“. The VoWiFi Handset will be restarted.
5.2 Replacement of VoWiFi Handsets
A VoWiFi Handset can be replaced with a spare VoWiFi Handset if it is broken. The VoWiFi
Handset registered in WinPDM , is associated with its device type, device ID and extension.
During the replacement procedure, the broken VoWiFi Handset’s device type and extension will
be associated with the spare VoWiFi Handset’s device ID.
5.2.1 Replacement Procedure Choice
• If you only have WinPDM, see 5.2.2 Replacement of Handset with WinPDM Only.
Data included in a replacement transfer
The following data is replaced during a replacement:
• User parameters
Note that the following data is not replaced:
• Downloaded language
• Certificates
• Licenses
5.2.2 Replacement of Handset with WinPDM Only
• If the broken VoWiFi Handset and the spare VoWiFi Handset have the same device type and
functionality license, see Replace without Move Licenses using WinPDM.
Replace without Move Licenses using WinPDM
Both the broken VoWiFi Handset and the spare VoWiFi Handset must be of the same device
type and have same functionality license.
1 In both VoWiFi Handset, press *#34# in idle mode and select “License“ to check that
they have same device type and licenses.
Alternatively, if the spare VoWiFi Handset has been factory reset, press “Info“ and select
“License“.
2 Put the broken VoWiFi Handset in the DP1 cradle.
3 Open the WinPDM.
4 Make sure that the VoWiFi Handset is saved in the WinPDM. In the Numbers tab, a
saved VoWiFi Handset has the symbol in the Saved column. If not, right-click the
VoWiFi Handset and select “Save“ in order to transfer the settings to the spare VoWiFi
Handset later on.
5 If the spare VoWiFi Handset has been previously used, perform a factory reset, see 5.1.5
Perform a Factory reset on page 11.
6 Put the spare VoWiFi Handset in the DP1 cradle.
To Next Page
Loading...
