26 June 2012 23
Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
6.7 Regional Settings
This section include settings suitable for a specific region or country.
6.7.1 Select Default Language
Defines he default operating language for the VoWiFi Handset. This setting can later be changed
by the user.
1 Select Device > Settings.
2 In the Language drop-down list, select the language to be used.
3 If the downloaded language is selected, it might be needed to select matching characters
as text input language, and the sort order in the phonebook
In the Input Language drop-down list, select the text input language to be used.
Note: This parameter is only applicable for the downloaded language and cannot be
changed by the user. See 6.5.6 Uploadable Language on page 22 for more information.
6.8 Display
6.8.1 Backlight Timeout
Numbers of seconds before the backlight is turned off.
1 Select Device > General.
2 In the Backlight timeout field, enter number of seconds before the backlight is turned of
when VoWiFi Handset is idle.
6.8.2 Brightness
1 Select Device > Settings.
2 In the Brightness drop-down list, select one of the following:
• Normal - maximum backlight will be used.
• Power save - reduced backlight will be used.
6.8.3 Screen Saver
1 Select Device > Settings.
2 In the Screen saver drop-down list, select one of the following:
• Information - time and status (for example message indication) will be displayed
when the screen saver is activated.
• Black - no information will be displayed when the screen saver is activated.
To Next Page
Loading...
