26 June 2012 24
Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
6.9 Menu Operation
6.9.1 Hide Menu Items
It is possible to hide menu items for the users. To hide or show a menu item, do the following:
1 Select Customization > Visibility.
2 Select “Hide”, “Show”, or “Hide admin“ for the applicable menu item in the drop-down
list. If “Hide admin“ is selected, the menu item will be visible in the VoWiFi Handset,
but cannot be edited by the user. The following items can be hidden:
• Connections (Network, Headset etc.)
• Profiles
• Settings (Sounds, Display, Language etc)
6.10 Location
Two types of location are supported, either a basic location solution that gives an approximate
location using Access Point (AP) location, or a personal security solution that gives a more
accurate location using a third-party Real-Time Location System (RTLS) solution.
The following RTLS solutions are supported:
• Cisco RTLS Solution
In order to use the Cisco RTLS solution, a Cisco Mobility Services Engine must be used and
configurations in the VoWiFi Handset are required.
• Ekahau RTLS Solution
In order to use the Ekahau RTLS solution, the VoWiFi Handset must be configured.
6.10.1 Configure Handset for Cisco/Ekahau RTLS Solution
1 Select Location > Common.
2 In the Location scanning drop-down list, select “Enable“.
3 In the Scanning interval
1
field, set the time between the scanning periods.
4 In the Scans per scanning period
1
drop-down list, select how many scans that should be
performed during each scanning period.
1. Note that close scanning periods, and frequently scans per period, will shorten the battery time.
To Next Page
Loading...
