Alcatel-Lucent OmniTouch 8118 - Display Settings

26 June 2012 19
Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
6.4.4 802.1X with EAP-FAST
To select EAP-FAST as the authentication method. Do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list., select “EAP-FAST”.
3 In the EAP authentication user name field, enter the user name for EAP authentication.
4 In the EAP authentication password field, enter the password for EAP authentication.
6.4.5 802.1X with PEAP-MSCHAPv2
Select PEAP-MSCHAPv2 if root certificate is to be used for authentication. To select PEAP-
MSCHAPv2 as the authentication method. Do the following:
1 Ensure that the VoWiFi Handset is online in WinPDM.
2 Import the root certificate by do the following:
• In the Numbers tab, right-click the VoWiFi Handset’s number and select “Edit
certificates“. An Edit certificate window opens.
• In the Root tab, click “Edit“ and select the root certificates to import. Click “Close“.
3 Select Network > Network A (B, C, or D)
4 In the Security mode drop-down list, select “PEAP-MSCHAPv2”.
5 In the EAP authentication user name field, enter the user name for EAP authentication.
6 In the EAP authentication password field, enter the password for EAP authentication.
6.4.6 EAP-TLS
Select EAP-TLS if a client certificate is to be used for authentication. To select EAP-TLS as the
authentication method, do the following:
1 Ensure that the VoWiFi Handset is online in WinPDM.
2 Import the certificate by do the following:
• In the Numbers tab, right-click the VoWiFi Handset’s number and select “Edit
certificates“. An Edit certificate window opens.
• In the Root tab and Client tab, click “Edit“ and select the certificates to import. Click
“Close“.
3 Select Network > Network A (B, C, or D).
4 In the Security mode drop-down list, select “EAP-TLS”.
5 In the EAP client certificate drop-down list, select the client certificate to use.