6 Guarantee and clauses
6.1 Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a
safe distance between your pacemaker or implant defibrillator and the handset which includes
magnetic elements: 4 centimeters (1,6 inches) at least.
To limit the risk of interference, people with pacemakers must keep the wireless telephone away
from their equipment (minimum distance of 15 cm/6 inches).
It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent
injury, before each use ensure sharp metallic objects are not stuck to the earpiece.
Avoid using phones (other than cordless) during an electrical storm. There may be a remote risk of
electric shock from lightning.
Do not use the device in environments where there is a danger of explosion.
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a
regular Public Switched Telephone Network (PSTN) connection. This can result in severe damage
to the phone.
Never allow your telephone to come into contact with water.
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone,
etc.) which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
Class 2 for OmniTouch äó 8012 DeskPhone according to IEEE802.3af), or via DC-in by a Certified
Direct Plug-In or Cord connected Power Unit approved as “LPS“ (Limited Power Source) against
CSA/UL/IEC 60950-1 and rated 5V dc, minimum 1A.
If you are connected to a POE connection do not use AC power supply.
The PoE (Power over Ethernet) devices that supply or receive power and their connected cables
must all be completely indoors.
The RJ-45 jack is not used for telephone line connection.
To Next Page
Loading...
