Alcatel-Lucent OPENTOUCH ALE-300 - Switching between Calls (Broker Call); Transferring a Call; Three-Way Conference with Internal And;Or External Contacts (Conference); Cancel Conference and Return to First Contact (if Conference Is Active)

User Manual
8AL90399ENAAed01 42 /101
2.25 Switching between calls (Broker call)
During a conversation, a second call is on hold.
Use one of the following:
• Select the call on hold icon from the conversation screen.
• Select the tab which is displaying the call on hold (depending on your desk phone, touch the tab
ou use the navigation keys) Retrieve
• Press the Back/Exit key to display the Perso page Select the call on hold.
You are in conversation with the second contact and the first one is on hold.
2.26 Transferring a call
Depending on the system configuration, transferring a call can be done in two ways.
1. Using the softkey
• Calling a second person during a conversation The first call is on hold.
• You can transfer the call immediately or wait for your contact to answer before transferring
the call.
Transfer
• The two callers are connected.
2. Using predefined keys
These predefined keys depend on the system and are reserved for specific countries as United
States.
• or
(1)
The first call is on hold.
• Calling a second person during a conversation.
• You can transfer the call immediately or wait for your contact to answer before transferring
the call.
• or
(1)
• The two callers are connected.
(1)
Depending on the model of your desk phone.
2.27 Three-way conference with internal and/or external contacts
(conference)
• During a conversation, a second call is on hold.
• Use one of the following:
o Conference
o
(1)
.
You are in conference mode.
(1)
Depend on system configuration for specific countries as United States.
2.27.1 Cancel conference and return to first contact (if conference is active)
• End conference (End conf)
2.27.2 Hang up on all participants (if conference is active)
• Hang up.
• You exit the conference.