User Manual
8AL90399ENAAed01 71 /101
4.26.8 Auto update the desk phone via USB key
You can use an USB-C key. The key has to be formated in FAT32 mode.
• Create an empty text file on the USB key: upgrade.auto
Please check that the file does not have the.txt extension (especially when the file extension is
hidden in system preferences).
• Create a directory on the USB key: upgrade
• Copy binary files into the new directory (the file names are given as an indication):
▪ bin86x8P
▪ noe86x8P
• Insert the USB key in the corresponding USB-C slot.
• Reboot the phone (the led is blinking during upgrade).
4.26.9 Send your desk phone or your add-on module to support
Please remove customization kit before sending back your desk phone or your add-on module to
hardware support as hardware support will send back a generic phone. Please refer to the accessories
section to see how to remove the customization kit.
4.26.10 Copy logs on USB drive
You can use an USB-C key. The key has to be formated in FAT32 mode.
• Insert the USB key in the corresponding USB-C slot.
• Config.MMI Servicing
• Copy logs on USB drive
• Enter password.
• Select the choice: Copy logs now, Copy logs before reboot, Copy logs using Multikey
To Next Page
Loading...
