User Manual
8AL90399ENAAed01 67 /101
4.19 Create, modify or consult your interphony list (max. 10 numbers)
• Reach the 'Menu' page.
• Settings My services Interphony
• Enter your password.
• Select an entry.
• Follow the on-screen instructions.
4.20 Install a USB accessory (Headset, Handsfree, Loudspeaker)
• Connect the accessory to the USB connector.
• When you plug the accessory in the USB port, the USB accessory is automatically detected. If an
another accessory is already connected with the same function (USB or Bluetooth® if available), a
popup asks you to select your preferred accessory to use for this function.
If you are using a Bluetooth® headset provided with a Bluetooth® USB dongle, you can connect the
headset to the USB connector. Use and connectability depend on the vendor of the headset.
4.21 Installing a Bluetooth® Wireless Technology headset (pairing)
This feature is available if your desk phone is equipped with the wireless module (depending on the
model of your desk phone). If it's not the case, the wireless module can be purchased separately: ALE-
108 Wireless Module.
You can then answer a call using your Bluetooth® headset or the Bluetooth® Handset on the office set.
Before a Bluetooth® headset can be used, it must be paired to the terminal. Before performing the
pairing operation, the headset must be in detectable mode.
Use one of the following:
• Bluetooth Search devices
• Reach the 'Menu' page. Settings Phone Bluetooth Add device
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed
• Select the relevant equipment.
• Add*
• Confirm Acknowledgement message and display of the headset icon on the terminal screen.
* If a password is requested, refer to the user documentation supplied with the heaset.
To Next Page
Loading...
