User Manual
8AL90399ENAAed01 63 /101
4.8 Selecting the welcome page
This function is used to choose the page displayed by default on the telephone.
• Reach the 'Menu' page.
• Settings Phone Homepage
• Enter your password (if required) and apply.
• Select the default page (Menu, Perso, Info, Last page seen…).
•
•
4.9 Selecting language
• Reach the 'Menu' page.
• Settings Phone Language
• Enter your password (if required) and apply.
• Select the language of your choice.
•
•
4.10 Programming keys for call numbers and functions (Perso page/F1 and F2
keys/Add-on keys)
If your desk phone is equipped with the magnetic keyboard, use it to enter letters. If not, use the
alphanumeric keyboard to enter letters. Use the alphanumeric keyboard key to switch between the
numeric and alphabetic keyboard. When in alphabetic mode, the LED corresponding to the key remains
lit up. The ALE-500 Enterprise DeskPhone has a virtual alphabetical keyboard displayed on the lower half
of the screen by sliding the screen to the left.
Depending on your desk phone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Abc' key in case a magnetic keyboard is connected (ALE-400, ALE-300, ALE-100).
• , Hold key (ALE-500)
(1)
.
• , Transfer key (ALE-500)
(1)
.
• , Conference key (ALE-500)
(1)
.
(1)
This key depends on the system configuration and countries as United States. In the event that
these keys are used for the hold, transfer and conference features, they are not programmable.
Led behavior may differ depending on the system configuration. For more information, contact your
installer or administrator.
To Next Page
Loading...
