Redial
The thirty most recently dialled numbers are saved to your handset.
1. Press up key to enter the menu.
2. Press up key /down key to select the number you wish to redial, and press call
key to dial the number.
Calling an Internal Number
1. In the standby mode, press INT key. INT symbol will be displayed, and you will
hear the internal line dial tone.
2. Enter the handset number of the internal line you wish to call.
3. To end the call, press end key on either one of the handsets.
Receiving an Internal Call
1. During an incoming internal call, the receiving handset will begin to ring. INT symbol
flashes, and the caller's handset number is displayed.
2. Press call key to receive the call.
3. Press end key to end the call.
Receiving an External Call during an Internal Call
1. During an incoming external call, both handsets in the call will beep. The Call waiting
tone function must be ON. Please refers to P.36 for setting the Call Waiting Tone.
2. Press end key to end the internal call.
3. Press call key to receive the call. The handset that presses call key first will be
the receiver of the call.
4. Press end key to end the call.
Calling an Internal Number during an External Call
Calling an Internal Number
1. During an external call, press INT key to hold the call.
2. Enter the handset number of the internal line you wish to call.
3. Press INT key again to end the internal call and return to the external call.
Transferring an External Call
1. During an external call, press INT key to hold the call.
2. Enter the handset number of the internal line you wish to transfer the call to.
3. Once the line is connected, press end key to transfer the call, or press INT key to
return to the external call.
Conference Call
1. During an external call, press INT key to hold the call.
2. Enter the handset number of the internal line you wish to transfer the call to.
3. Once the line is connected, press “#” key to conference call.
4. Press end key to end the conference call.
28
To Next Page
Loading...
